Pipes And Fittings
Flaring tool function to mengmbangkan end of the pipe to be connected with a threaded connection (flare fitting)
Flaring tool consists of 2 blocks held together with bolts and nuts butterfly (wing nut). The second block is formed lubangdengan a variety of pipe sizes that can be inserted. 3/16 "s / d 5/8" (chamfer). In addition flaring tool also has a joke consisting of legs which can be slipped on a block that has a bolt at the top with a stem that can be played, while at the other end on the bottom by a flare cone conical with an angle of 45 ° to suppress and develop the end of the pipe. Consider in this case do not forget to enter the flare nut, before the end of the pipe clamped in the block with a tip made approximately 3 mm above the block, before the end of the pipe is pressed, the tip cone should be slightly compressor oil, lau rod rotated players. We should not memutuar stem in joke too hard, because if it's too loud end of the pipe being developed too thin when hardened again in flare fittings can be broken and the system is leaking.
Flaring Tool
brand: GMT
size: 3/16 "~ 3/4"
Available in Set with Pipe Cutter and without Pipe Cutter